Wotofo Faris RDTA Review

The Wotofo Faris is one of the best RDTA tanks on the market today. The versatility of this product is what makes it unique. The Faris can be used as either an RDTA or an RDA. It is also compatible with squonker mods thanks to the squonker pins that it comes with. The Faris is not only a highly functional device, but it also has a stylish design.

The Wotofo Faris RDTA is made of Stainless Steel and Pyrex glass. The dimensions of the RDTA are 44mm by 24mm. Without the tank section, the dimensions of the atomizer are 36mm by 24mm. As indicated above, you can use the Faris with any 510 compatible mod. There is a gold-plated 510 pin under the device. You can switch the 510 pin for the squonk pin that is included in the package if you want to use it with a squonker mod.

The Wotofo Faris comes with an 810 Delrin drip tip and an 810 acrylic drip tip. You can probably use a 510 drip tip on the atomizer if you have an 810 to 510 adapter.

The design of the Wotofo Faris is very simple. The build deck sits on top of the tank section. To access the build deck, all you have to do is remove the top cap. The Faris has a postless build deck. You can create a single or double coil build on the deck. The atomizer comes with a pack of three framed Clapton coils so you can start vaping immediately. If you have your own coils and you are wondering how to figure out the resistance of your build, you can use the ohms law calculator at the Wotofo online store.

The Faris’ build deck has large juice wells and ports to fit your wick. Below the build deck, you will find the refill port for the tank. There is a plug covering the refill hole, which you can remove when you need to refill the tank.

The Wotofo Faris tank has a capacity of 3ml when you use the clear glass. With the frosted glass, the tank capacity is 2ml. You can convert the Faris into an RDA by removing the tank section, and attaching the bottom section that is included in the package. The process is pretty easy.

The airflow holes on the Faris are located on the side of the device. There are six airflow holes that are sizable enough to give you massive clouds of vapor. When you take off the top cap and look at the build deck, you will notice that the airflow holes are angled downwards towards the build deck. Therefore, when you take a puff, air travels down to the coil before going up to your mouth.

The Wotofo Faris is designed with attention to detail. This is a 10/10 atomizer. You can get the Faris RDTA at the Wotofo online store for just $24.99 – this is a $5 discount on the original price of this product.

Author: Saa K

Share This Post On